Skip to content Skip to sidebar Skip to footer

When Conventional Drilling May Not Be Enough for Complex Wells

Conventional drilling remains a proven approach across many oil and gas wells. For the right well, with the right conditions, it can be practical, familiar, and effective. The challenge begins when the well conditions no longer leave much room for error. 

Some wells create pressure, stability, or operational challenges that require more control than a standard drilling approach can provide. When the pressure window is narrow, the formation response is uncertain, or losses and influxes become more likely, the question is no longer only how to drill the well. The better question is whether the drilling method gives the team enough control to manage the well safely and efficiently. 

What conventional drilling does well 

Conventional drilling works by using the hydrostatic pressure of the drilling fluid to help manage pressure in the well. For many wells, this approach gives the team enough control to drill the planned section, maintain stability, and respond to expected conditions. 

It also benefits from being widely understood across drilling teams, contractors, and service providers. That familiarity matters because it can make planning, equipment selection, and field execution more straightforward. 

However, conventional drilling has limits when the difference between pore pressure and fracture pressure becomes tight. In those conditions, the margin between taking an influx and losing fluid to the formation can become small. That is where pressure management becomes a more central planning issue. 

What managed pressure drilling is 

Managed pressure drilling, often called MPD, is defined by Drilling Matters as an adaptive drilling process used to precisely control the annular pressure profile throughout the wellbore. Instead of relying only on mud hydrostatic pressure, MPD uses a combination of surface pressure, mud hydrostatic pressure, and annular friction to help balance exposed formation pressure (Drilling Matters, n.d.). 

The Journal of Petroleum Technology explains MPD as an overbalanced drilling method that maintains near-constant or correct bottomhole pressure using mud density, equivalent circulating density, and backpressure within a closed system (Godhavn, 2011). 

In simple terms, MPD gives the drilling team more active control over downhole pressure. It does not remove the need for sound planning, experienced people, or proper well control practices. It gives the team another way to manage pressure when the well conditions call for it. 

When conventional drilling may not be enough 

Conventional drilling may be enough for many wells, but teams should review the approach carefully when the expected drilling conditions become more complex. The goal is not to use MPD on every well. The goal is to identify when added pressure control may support safer and more efficient execution. 

Operators and project teams should consider a deeper pressure management review when: 

  • The drilling window is narrow 
  • Pore pressure and fracture pressure margins are close 
  • Losses or influxes are likely 
  • The well has pressure uncertainty 
  • The well is high-pressure or high-temperature 
  • Previous wells in the area had instability or pressure issues 
  • Mud weight changes may create operational trade-offs 
  • The project depends on more controlled bottomhole pressure 
  • Conventional methods may require extra casing strings or compromises 
  • The cost of pressure-related downtime would be high 

These signs do not automatically mean MPD is required. They mean the well deserves a careful review before the rig starts turning. The earlier the team identifies these conditions, the more options it has to plan the right approach. 

Why narrow drilling windows matter 

A narrow drilling window creates a difficult balance. If bottomhole pressure is too low, the well may take an influx. If bottomhole pressure is too high, the formation may fracture and losses may occur. Both situations can create time, cost, and safety concerns. 

BSEE’s managed pressure drilling technical material notes that MPD has been driven in offshore operations by very narrow margins between formation pore pressure and fracture pressure downhole (Malloy, 2007). This is one of the main reasons MPD is discussed when conventional drilling may not provide enough pressure control. 

For project teams, the practical takeaway is clear. Pressure uncertainty should not be left until the well is already active. It should be addressed during planning, when the team can review the pressure profile, drilling window, equipment needs, crew readiness, and contingency options. 

HPHT and advanced wells need early review 

High-pressure and high-temperature wells can create added challenges for drilling operations. Stanford geothermal proceedings note that drilling geothermal and HPHT wells can present significant challenges to drilling automation and well control because of extreme formation temperatures and elevated pressures (Duan, 2025). 

These conditions make early planning even more important. The technical solution may differ from well to well, but the planning principle is the same. Teams need to understand the pressure environment, the equipment requirements, the response plan, and the experience needed to manage the well safely. 

MPD may be part of that conversation when pressure control is a key concern. It should be considered as part of the planning process, not as a late reaction after pressure-related problems have already appeared. 

Why MPD planning should happen before spud 

MPD works best when it is planned into the drilling program early. Waiting too long can limit the team’s options, create equipment delays, or force field decisions under pressure. 

Early MPD planning can help the team review: 

  • Well objectives and pressure profile 
  • Expected pore pressure and fracture pressure 
  • Mud weight strategy 
  • Backpressure requirements 
  • Surface equipment needs 
  • Crew training and responsibility levels 
  • Contingency procedures 
  • Data monitoring and response process 
  • Interface with the rig and service providers 
  • Communication between office and field teams 

This planning does not mean the team is overcomplicating the well. It means the team is checking whether the drilling method fits the conditions. If conventional drilling is still the best approach, that decision becomes more defensible. If MPD is needed, the team has more time to prepare it properly. 

MPD is not just equipment 

A common mistake is thinking about managed pressure drilling only as equipment. Equipment matters, but MPD also depends on planning, people, procedures, and coordination. 

The IADC’s managed pressure drilling accreditation program emphasizes training for people with MPD operation responsibilities, including role-specific skills and confidence in preventing and handling MPD incidents (International Association of Drilling Contractors, n.d.). This is important because pressure control depends on the people operating, monitoring, and responding to the system. 

A good MPD plan should define how the system will be used, who is responsible for decisions, how pressure changes will be monitored, and what happens when conditions shift. Without that structure, the equipment alone cannot deliver the full value of the method. 

How MPD supports better drilling decisions 

MPD can support better drilling decisions by giving the team more information and more control during pressure-sensitive operations. When used in the right well conditions, it can help the team manage bottomhole pressure more actively and respond to changes with better awareness. 

This matters because pressure problems can affect more than one part of the well. They can influence mud strategy, casing points, wellbore stability, well control planning, rig time, and overall project cost. 

The value is not only in using a more advanced method. The value is in matching the drilling approach to the well’s real conditions. That match is what helps operators avoid treating every well the same when the pressure environment clearly demands a more controlled approach. 

What to consider before choosing a drilling approach 

Choosing between conventional drilling and MPD should come from a practical review of the well, not from habit or assumption. Some wells may be safely and effectively drilled with a conventional method. Others may require added pressure control to support better execution. 

Before deciding, project teams should review the expected pressure window, offset well history, well complexity, available equipment, crew readiness, cost exposure, and contingency options. The decision should also consider whether the existing team has the right support to interpret pressure behaviour and respond quickly during operations. 

This is where outside drilling support can be useful when it works in the right way. A good drilling partner should work with the existing team, not take over the project. The goal is to bring added experience, planning structure, and field-tested judgment into the process so the operator’s team can make the right decision for the well. 

Final thought 

Conventional drilling will continue to be the right approach for many wells. The key is knowing when the well conditions require a closer look at pressure management before operations begin. 

When pressure windows are narrow, well conditions are uncertain, or HPHT challenges are present, managed pressure drilling may deserve early consideration. The decision should be made through practical review, not guesswork and not after the well is already in trouble. 

For operators planning complex wells, the right drilling support should help the existing team make better decisions before the rig starts turning. BOAX supports drilling teams with practical experience across drilling management, professional engineering, project management, drilling operations, construction services, and managed pressure drilling. 

References 

Drilling Matters. (n.d.). Managed pressure drilling. https://drillingmatters.org/glossary/managed-pressure-drilling/ 

Duan, X. (2025). Coupled managed pressure and temperature drilling in geothermal and HPHT wells. Stanford University. https://pangea.stanford.edu/ERE/pdf/IGAstandard/SGW/2025/Duan.pdf 

Godhavn, J. M. (2011, January 14). Managed pressure drilling 101: Moving beyond “it’s always been done that way.” Journal of Petroleum Technology. https://jpt.spe.org/managed-pressure-drilling-101-moving-beyond-its-always-been-done-way 

International Association of Drilling Contractors. (n.d.). Managed pressure drilling. https://iadc.org/accreditation/mpd/ 

Malloy, K. P. (2007). Managed pressure drilling: What is it anyway? World Oil. U.S. Bureau of Safety and Environmental Enforcement. https://www.bsee.gov/sites/bsee.gov/files/tap-technical-assessment-program//582ab.pdf 

Leave a comment