Drilling problems usually do not start at the rig. They often start earlier, during planning, budgeting, contractor selection, risk review, or communication between office and field teams. By the time a problem shows up at the wellsite, the project may already be losing time and money.
That is why the better question is not only, “Who can help us fix this drilling issue?” The better question is, “When should we bring in drilling management support before the issue becomes expensive?” For oil and gas operators, the right time is often earlier than expected.
Why drilling management support matters
Drilling is not just a technical activity. It is a chain of decisions that connects engineering, field operations, contractors, service companies, logistics, safety, reporting, and cost control. When those parts are not aligned, small issues can become expensive.
A drilling program may have a good technical plan, but it can still run into problems if the cost estimate is weak, the field team is not aligned, service providers are not ready, equipment risks are missed, or decisions take too long during operations. Research on drilling project management has linked non-productive time to issues such as poor planning, communication gaps, logistics delays, equipment failures, and inefficient project management practices (Omojuyigbe et al., 2025).
In simple terms, drilling delays are not always caused by the hole. Many are caused by the system around the hole. That is where experienced drilling management support can help, especially when the goal is to strengthen the team already responsible for the project.
Strong drilling management support should not be seen as someone coming in to take over the existing team. The best support works with the people already involved. It helps the operator’s team clarify the plan, strengthen decision-making, coordinate the moving parts, and close the gaps that can turn into costly delays.
The goal is not to replace the internal team. The goal is to support them with added experience, structure, and field-tested judgment.
Sign 1: The well is complex or outside your usual operating pattern
Some wells need more planning discipline than others. A simple drilling program may be manageable with a standard internal process, but complex wells carry more risk. This can include long-reach horizontal wells, high-pressure and high-temperature wells, multi-lateral wells, monobore wells, disposal wells, or wells in challenging formations.
When the well is outside the team’s usual pattern, the planning process should be stronger, not faster. That means reviewing offset data, pressure risks, drilling hazards, equipment requirements, directional planning, service needs, and contingency options before operations begin.
BOAX provides drilling operations and specialty services for complex wells, including long-reach horizontal wells, monobore wells, HPHT complex wells, disposal wells, multi-lateral wells, and peer review of cost estimates and drilling failures (BOAX Resource Management, n.d.). The value is not only in knowing that a well is difficult. The value is knowing where it can fail, how to prepare before it does, and how to support the team already responsible for delivering the well.
Sign 2: The AFE or cost estimate feels uncertain
A drilling cost estimate should not just be a number used for approval. It should be a working guide for how the project will be planned, managed, and controlled. When the approved budget is not built around real operational risk, the project can be exposed before it starts.
Operators should review the cost estimate carefully when:
- The well design has changed
- Offset performance has been inconsistent
- Contractor or service costs have moved
- Pressure or formation risks are unclear
- The drilling schedule is aggressive
- Past wells had unexpected downtime
- The team is relying on assumptions that have not been tested
BOAX’s professional engineering services include preparation of detailed drilling programs, cost estimate and AFE preparation, directional planning, H2S and EPZ calculations, and offset and pacesetter review. This is where drilling management support can help the existing team redirect the conversation from “What is the lowest estimate?” to “What is the most realistic plan to protect the well economics?”
That shift matters because a low estimate does not reduce cost if the well later loses days. A stronger estimate gives the operator’s team a more practical view of the budget, the risks, and the decisions that may affect the final well cost.
Sign 3: Past wells had repeated delays or non-productive time
If the same problems keep showing up from well to well, the issue may not be one bad day in the field. It may be a process problem. Repeated non-productive time can point to gaps in planning, equipment readiness, communication, contractor coordination, logistics, or decision-making.
A 2025 study on drilling project management found that non-productive time affects drilling costs and timelines, with key drivers including poor planning, communication gaps, and equipment failures (Omojuyigbe et al., 2025). The study also found that strategic project management, better stakeholder coordination, real-time monitoring, and technology adoption can help reduce downtime.
For operators, the lesson is practical. Do not wait for the next well to prove the same problem exists. Review the root cause before the next program begins so the team can improve the next well instead of repeating the same issues.
Drilling management support can help operators and their existing teams look at past performance, compare the plan against field reality, and identify where the next well needs tighter control. This should be a collaborative review, not a blame exercise. The purpose is to learn where time, cost, or coordination broke down and then build a better process for the next well.
Sign 4: Office planning and field execution are not fully aligned
Many drilling projects lose time because the office plan and the field reality do not match. This does not always mean the plan is bad. It may mean the plan is not practical enough for the conditions, contractors, timing, or people involved.
Field teams need clear instructions, but they also need room to respond when conditions change. Office teams need accurate reports, but they also need people who can interpret what is happening and make good decisions quickly. When those two sides are not aligned, drilling execution can become slower and more reactive.
BOAX’s project management services include support from single wells to multi-rig mega pads, daily field reports, daily field operation coordination, service negotiation, third-party technical reports, end-of-well reports, and operational invoice review. That kind of support helps connect the office, field, and service providers into one working system.
This is also where the role of an outside drilling management team should be clear. The purpose is not to override the operator’s team. It is to help the team work with better information, stronger coordination, and more confidence in the next decision. When everyone understands the plan, the risks, the cost impact, and the next decision point, execution becomes more controlled.
Sign 5: The project depends on several contractors and service providers
Drilling programs often involve many moving parts. Rig crews, directional drilling providers, mud companies, cementing crews, trucking, construction teams, safety support, pressure control equipment, and other services all affect the final result. When those groups are not aligned, the operator can lose time between activities.
Strong drilling management helps make sure the work is coordinated before the delay happens. This includes schedule review, service readiness, role clarity, daily coordination, reporting, and issue tracking. The goal is not to micromanage every provider. The goal is to keep the drilling program moving with fewer surprises.
For operators, this matters because contractor performance does not exist in isolation. It depends on how well the whole program is planned and managed. A good drilling management team helps create that alignment while respecting the role of the operator, internal staff, contractors, and field personnel already involved in the project.
Sign 6: Pressure management is a concern
Pressure-related issues can quickly affect drilling performance, safety, and cost. Not every well needs managed pressure drilling, but every well with pressure uncertainty deserves proper review. When pressure windows are narrow, downhole conditions are complex, or losses and influx risks are present, pressure management should be considered early.
BOAX offers managed pressure drilling services, including planning and engineering, equipment supply, field operations, real-time data monitoring, and customized solutions for efficiency and safety. This is a good example of where early involvement matters because pressure drilling support should not be treated as an afterthought.
When handled properly, this support gives the existing team more clarity around pressure risks and the options available before the well reaches a critical point. The goal is to give the operator’s team better control of the planning conversation, not to add unnecessary complexity to the project.
What drilling management support should help operators do
The purpose of drilling management support is not to add another layer of administration. It is also not to replace the people already working on the project. The purpose is to improve planning, reduce avoidable risk, support better field decisions, and protect the value of the well.
Good drilling management support should help operators:
- Build a more realistic drilling program
- Review cost estimates and AFE assumptions
- Identify technical and operational risks early
- Improve contractor and service coordination
- Strengthen office-to-field communication
- Track daily progress and cost exposure
- Reduce avoidable non-productive time
- Support faster decisions during drilling
- Review performance after the well is complete
- Improve the next well based on what was learned
- Support the existing team with added experience and structure
The real value is not only in solving problems. It is in preventing the problems that were likely to happen. When support is brought in early, it can help the operator’s team prepare with more confidence and reduce the chance of avoidable delays.
How BOAX Can Help You
BOAX provides drilling management services for the energy industry, including professional engineering, project management, drilling operations, construction services, and managed pressure drilling services (BOAX Resource Management, n.d.). That range matters because drilling performance is not controlled by one decision. It is shaped by planning, engineering, field coordination, pressure management, construction readiness, cost review, and daily execution.
For operators planning complex wells, reviewing drilling costs, dealing with repeated downtime, or preparing for a technically demanding program, BOAX can help support the existing team in the areas where drilling problems often begin. The goal is not to take over the project team. The goal is to work with the people already involved, strengthen the plan, bring practical drilling experience into the process, and help the operator make more informed decisions before issues become expensive.
This is where experienced drilling management support becomes valuable. It gives the operator’s team another layer of practical judgment, planning discipline, and field awareness while keeping the project aligned with the team already accountable for delivery.
Final thought
Drilling management support is most valuable before the well is already in trouble. When operators wait until costs rise, schedules slip, or field issues repeat, they are often paying to recover from problems that could have been reduced earlier.
The better approach is to bring in experienced support when the well is being planned, reviewed, budgeted, or prepared for execution. That support should work alongside the operator’s existing team, not replace it. This is where better planning can protect days, dollars, and project confidence.
If your team is planning a drilling program, reviewing cost exposure, or looking for practical support on a complex well, BOAX can help strengthen the work before the rig starts turning.
References
Omojuyigbe, S. O., Etaje, D., & Mepaiyeda, E. B. (2025). Project management plan for execution of drilling projects for minimal non-productive time (NPT). Journal of Energy Technology and Environment, 7(4), 300-307. https://doi.org/10.37933/jete/7.4.2025.2076
Sahu, A. K., Rahate, K. S., & Francis, D. (2026). Characterizing and mitigating non-productive time in drilling operations through a field-scale digitization approach. Research Square. https://doi.org/10.21203/rs.3.rs-8826641/v1

